And it can be used as a ELM327 device also, support most of ELM327 software. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. Trouble codes and real-time data should now be available to .uk updated a new real test:įLY FVDI J2534 Test Report: Ford ECU diagnosis wit ScanMaster-ELMįVDI J2534 is a vehicle communication interface device that full compatible with SAE J2534-1 and partly compatible with SAE J2534-2.
Go online and connect to the vehicles ECU.If the software fails to connect to the interface, un-install it from the Device Manger and reinstall the drivers by plugging in back in.More information about this is provided in our Comprehensive ELM327 Guide. If the COM-Port is set higher than the software allows, you will need to change the COM-Port in the Device Manager by right clicking on properties.Open the OBD-II software and connect to the interface by selecting the COM-Port associated to the device.If you are having trouble, keep in mind that it is no further than 3 feet away from the driver. The OBDII plug is normally located under the steering column No tools are required to locate it.Connect your ELM327 Interface to the OBD-II adapter in your vehicle.Start your vehicle or have the ignition switch on with power to the battery.Consider opening the device manager before you plug in the OBD-II adapter so you can see the item added to the device list in real-time.Identify the COM-Port associated to the device in the Device Manager.If the drivers fail to install, attempt to install the drivers manually.Make sure your computer is connected to the internet and your computer is allowed to download new drivers.Connect the ELM Interface to your computer and allow the drivers to automatically install.For ease of use we suggest the ScanMaster-ELM Demo or EasyOBD-II.Install the ELM327 OBD2 software package of your choice.Download and Print the Windows USB ELM327 Setup Instruction Manual
0 kommentar(er)
